|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
LSI/CSI UL (R) LS7314-7315 (631) 271-0400 FAX (631) 271-0405 LSI Computer Systems, Inc. 1235 Walt Whitman Road, Melville, NY 11747 A3800 AC POWER CONTROLLERS FEATURES: * 10 I/Os to Select/Indicate up to ten Power Levels * Inputs activated by Touch or Pushbutton Switch * Output switches pure and precise AC Power to Load * Operates with 50Hz/60Hz line frequency * Rugged, latchup-free process technology * +10V to +14V operation (Vss-VDD) * LS7314, LS7315 (DIP; LS7314-S, LS7315-S (SOIC) - See Figure 1 APPLICATIONS: * Universal and shaded-pole motor speed control for modern appliance designs. Eliminates awkward mechanical switch assemblies and multi-tapped motor windings. (See Fig. 4C) * Multi-level light switches. (See Fig. 4D) DESCRIPTION: The LS7314 - LS7315 are MOS integrated circuits specifically designed for appliance motor speed control, lighting control, etc. I/Os (PLs) are provided for selecting/indicating from one to ten power levels. The LS7315 is designed for pushbutton control. The LS7314 is designed for touch control. (See Figures 4A and 4B) INPUT/OUTPUT DESCRIPTION: PL1-PL10 (Pins 1-8, 15, 16) Ten inputs/outputs for selecting ten output phase angles (power levels). When no power level is selected (such as after system power-up) PL1-PL10 all act as inputs. When a power level is selected by applying a logic zero at one of these inputs for TH time (See Dynamic Characteristics), the output (TRIG) is turned on at the phase angle selected and the PL input switches status to become an output in order to drive a display, such as an LED. It switches back to the input state when another PL input is activated or when OFF is selected. (See Note 1) OFF (Pin 10) If TRIG is on, a logic 0 applied to the OFF input for TH time turns TRIG output off and switches the selected PL back to the input state. If TRIG is off, activating OFF leaves the circuit unaffected. Following an OFF activation, TRIG can be turned on by applying any PL input. (See Note 1) SYNC (Pin 12) Input for PLL reference frequency (50Hz/60Hz). All internal clock frequencies are synchronized with the SYNC input. CAP (Pin 11) Input for component connection for the PLL filter capacitor. 7314-040197-1 A CONNECTION DIAGRAM - TOP VIEW PL3 PL4 PL5 PL6 PL7 PL8 PL9 1 2 3 4 5 6 7 16 15 14 13 12 11 10 9 FIGURE 1 LS7314 LSI PL2 PL1 Vss (+V) TRIG SYNC CAP OFF V DD (-V) PL10 8 TRIG (Pin 13) This output is designed to drive a triac in series with the load and control its firing angle with respect to the AC line. A 1ms output pulse width is provided to enable the triac to fire even with inductive loads which cause significant phase delays between voltage and current. Vss (Pin 14) Supply voltage positive terminal. VDD (Pin 9) Supply voltage negative terminal (ground). NOTE 1: LS7315 has an internal pullup resistor on this input and LS7314 does not. (See DC Electrical Characteristics.) FIGURE 2. TRIG PHASE ANGLE O SYNC O TRIG TW FIGURE 3. LS7314-LS7315 BLOCK DIAGRAM LEVEL 1 POWER LEVEL ROM LEVEL 10 OFF 10 + DRIVER PL1 15 + DRIVER CONTROL LOGIC PHASE ANGLE POINTER DIGITAL COMPARATOR DRIVER 13 TRIG PL10 8 V DD + PHASE-LOCKED LOOP AND CLOCK GENERATOR V DD + 11 CAP V SS V SS 12 SYNC - TABLE 1. TRIG PHASE ANGLES, O (1) PL 1 2 3 4 5 6 7 8 9 10 O* 43 55 68 81 95 108 122 134 147 160 % PWR (2) 8 16 26 40 55 69 82 90 96 99 O ** 81 105 116 120 123 129 134 160 167 175 %PWR (2) 40 67 77 80 83 87 90 99 99 99 FIGURE 4C and 4D NOTES NOTE 1: Value for 5mA LEDs. NOTE 2: Use zener which produces 6.2V 5% at 500A or less, i. e. P/N MZ4627. NOTE 3: R6-C6 Snubber Network may be required for large inductive loads. NOTE 4: Tie all unused touch inputs together and return to Vss through 100k Ohm, 1/4W resistor. NOTE 5: The AC Mains Polarity shown is required for Touch Control applications. *LS7314 & LS7315 **LS7315-51 FIGURE 4C VALUE TABLE CONDITION (1), (3) (1), (4) (2), (3) (2), (4) (1) No LEDs (3) 115VAC, C2 = 200V C2(F) 0.47 0.33 0.68 0.47 (2) 5mA LEDs (4) 220VAC, C2 = 400V (1) (2) The TRIG Phase Angles shown in TABLE 1 are referenced to the SYNC input. O values are mask programmable. The percentage of Full Power delivered to a resistive load by the Triac Switch. FIGURE 4A. PUSHBUTTON INTERFACE FOR LS7315 PL10 PL1 OFF FIGURE 4B. TOUCH INTERFACE FOR LS7314 SEE NOTE 4 PL10 PL1 OFF R8 R3 R7 R8 R7 R8 R7 Vss VDD R8 TP TP R8 TP R8 R3 = 10K , 1 / 4 W R7 = 1M to 5M , 1/4W (Select for Sensitivity) R8 = 2.7M , 1/4W for 115VAC Mains R8 = 4.7M , 1/4W for 220VAC Mains 7314-033197-2 FIGURE 4C. P G C1 R6 C6 MT1 T MT2 MOTOR SPEED CONTROL APPLICATION + C5 Z1 C4 R9 C3 AC MAINS SEE NOTE 3 L C2 D1 12 SYNC 9 V DD PL10 13 TRIG 11 CAP 14 L S 7 3 1 4 - L S 7 3 1 5 V SS PL1 15 OFF 10 SEE NOTE 5 M R2 R1 8 PL10 N PL1 OFF R5 Use Fig. 4A or 4B Interface Circuits R4 Z2 C1 = 0.15F, 200V (400V) * C2 = See Figure 4 Value Table C3 = 0.047F C4 = 470pF C5 = 220uF C6 = 0.47F, 200V (400V) * L = 100H (200H) * D1 = 1N4148 T = Q4004L4 (Q5004L4)* Typical R1 = 82 R2 = 1.5M R4 = 560 (See Note 1) R5 = 10k R6 = 1.8k, 1W (2W) * R9 = 100 Z1 = 13V 5%, 1W Z2 = 6.2V, 1/4W (See Note 2) All resistors 1/4W, all capacitors 25V unless otherwise specified. * Indicates component change for 220VAC Mains. FIGURE 4D. MULTI-LEVEL WALL SWITCH DIMMER APPLICATION P G MT1 Q40044L4 .047F + 13V 1W 220F 470pF .047F 200V 0.15F MT2 1.5M 115V AC MAINS 100H 2W 2 0 0 V 1N4148 12 SYNC 9 V DD PL10 8 13 TRIG 11 CAP 14 82 0.68F L S 7 3 1 4 - L S 7 3 1 5 V SS PL1 15 OFF 10 INCANDESCENT LAMP LOAD PL10 N All Resistors 1/4W, all Capacitors 25V unless otherwise specified. Component Values are for use with 115VAC Mains and 2.5mA LEDs. Use Fig. 4A or Fig. 4B Interface Circuits 1K PL1 OFF 10K 6.2V, 1/4W (See Note 2) 7314-033197-3 MAXIMUM RATINGS: PARAMETER Storage Temperature Operating Temperature DC Supply Voltage Any Input Voltage DC ELECTRICAL CHARACTERISTICS: (TA = 25C, all voltages referenced to VDD) SYMBOL TSTG TA Vss - VDD VIN VALUE -65 to +150 0 to +80 +20 Vss - 20 to Vss + 0.5 UNIT C C V V Supply Voltage Supply Current Input Voltage: SYNC, LO SYNC, HI All other inputs, LO All other inputs, HI Input Current: SYNC Input Input Pull-up Resistance: For LS7315 PL, OFF Output Voltage: TRIG, HI TRIG, LO Output Current: TRIG, Sink PL Source DYNAMIC CHARACTERISTICS: SYMBOL VSS IDD MIN +10 - TYP +12 1.2 MAX +14 2 UNIT V mA CONDITION Vss = 12V, outputs off VISL VISH VIL VIH 0 2/3Vss 0 1/2Vss - 1/3Vss Vss 1/4Vss Vss V V V V - IH - - 110 A With Series 1.5M Resistor to 115VAC RIN 50 100 200 k - VOH VOL Vss - Vss - 8 - V V - IOS IOPL 25 5 - - mA mA Vss = +12V VOL = Vss - 4V VOP L= Vss - 1V SYMBOL SYNC frequency PL, OFF hold time TRIG Pulse Width fS TH TH Tw Tw MIN 40 50 60 - TYP 1.0 1.2 MAX 70 infinite infinite - UNIT Hz ms ms ms ms CONDITION 60Hz SYNC 50Hz SYNC 60Hz SYNC 50Hz SYNC The information included herein is believed to be accurate and reliable. However, LSI Computer Systems, Inc. assumes no responsibilities for inaccuracies, nor for any infringements of patent rights of others which may result from its use. 7310-032597-4 |
Price & Availability of 7314 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |